This Story Behind Ghost Immobiliser Install Will Haunt You Forever!
Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It's discreet It does not include LED indicators or key fobs and is concealed in the wiring of the vehicle.
It also allows users to disable the system temporarily through Transport Mode in the event of renting out their vehicle. This guide will guide you through the installation of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system connects directly to your car's ECU and is secured by a unique PIN code of your choice. It is inaccessible to thieves using diagnostic scanners or other modern methods, and is unable to be disabled by cutting circuits.
The system is simple to use, however it's essential to use a professional installation to ensure a clean and secure connection to your vehicle's ECU. Installers certified by Thatcham can assist with the installation and programing of your Ghost system. They can also recommend a tracking system or alarm to complete your vehicle's protection package.
To avoid an accidental deployment of short circuits or airbags, the installer must first remove your battery. When the battery is disconnected, the installer may be able to work safely. Basic hand tools are useful for making precise connections and a multimeter may be used to verify electrical values and ensure safety. Insulation tape and cable ties are also vital for protecting connections and keeping wiring tidy. Lastly, the user manual provides specific guidance specifically tailored to the Ghost Immobiliser model you have.
During the installation process, it's important to choose the right grounding location that is free of debris and paint. Installers should also make sure that the immobiliser's wires, CAN H and can L are connected to the correct ECU ports. Depending on the model, these wires might need to be soldered or plugged into. To ensure a secure and durable connection it is recommended you choose a top-quality plug.
Transport Mode can be turned on by the client after the installation is completed. This allows valet parking or mechanics to use the vehicle without having to know the pin code. To accomplish this, the customer must press the button for service on the dashboard 5 times within 2 seconds. After this is done the system will verify by displaying 5 signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a great option for those who regularly rents out their vehicles on platforms such as Turo. Immobilisers can lower insurance costs, since it lowers the chance of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser in order to guard your vehicle from theft. The device stops your car from starting if someone steals or copies your key. This is due to its high-tech technology, which is designed to stop the engine from running without the correct PIN code is entered.
The device is connected to the vehicle's bus network CAN which allows direct communication with the ECU. It uses the buttons on your dashboard and steering wheel to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your vehicle. This is the most secure security system that protects your car's pride and joy and will ensure its value when you want to sell it in the future.
Installing a ghost immobiliser can be a simple process, but it's important to follow the steps carefully to avoid issues with electricity and system malfunctions. First, you must locate a power supply of 12V and a solid grounding on the car's chassis. Then, you can begin connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a secure connection. Insulate the connections using heat shrink tubing or insulation tape, as well as other materials to prevent short circuits of electricity.
Once the wires have been connected, you can connect the battery and begin the engine to check whether the immobiliser works. Once everything is working properly, you can install it in a secure place beneath the dash or anywhere else in the vehicle. Make sure to hide it well to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it is a top-quality deterrent to car burglars. It is invulnerable to hacking and key cloning and cannot be disabled without a code. The device is easy to use, and can be set into a service valet setting so that your vehicle will not be activated if you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. The Ghost Immobiliser does not interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
The system is also inaccessible by thieves using scanners for diagnostics. The system doesn't send or receive radio frequency signals, but instead uses CAN data to communication with your ECU. It doesn't even require any modifications to your existing key fobs.
Enter your disarm sequence (either two or one buttons) and then turn on the ignition in your car to use Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After that, you are able to start your car and drive away safely.
Once installed, the Ghost Immobiliser will safeguard your vehicle from hacking and key cloning, while protecting the value of your most prized possession. If you have to surrender your car to a valet or service provider, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll have to locate a source of constant power (12V) and an earthing point. Make sure that both are well-insulated and safe to touch. Cable ties are also recommended for bundling and secure the wires. This reduces the possibility of theft by thieves. Be sure to double-check the locations of these points to avoid making mistakes, and mark them with a piece of tape or label. It's recommended to inspect every connection for signs of wear and tear. Loose connections can lead to problems with the system, so be certain that they are securely fixed and well-insulated. Also, don't forget test the Ghost Immobiliser after the installation is completed. This will ensure that the unit is operating properly and that all connections are safe and well-insulated. Be sure to correct any issues as soon as they arise.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that integrates seamlessly into your vehicle's ECU to stop unauthorized engine start. Its cutting-edge technology safeguards your car against key cloning, hacking, and other methods that thieves employ to steal cars. The Ghost also works in conjunction with existing alarm and tracking systems to offer the best protection for your vehicle. The Ghost's unique features, combined with its subtle design makes it a sought-after option for both car enthusiasts and security conscious drivers.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, it is essential to follow the steps of the installation procedure. Consult car stolen with ghost immobiliser for the vehicle to help you locate and connect the wires. After that, you'll need determine the power source and grounding points. Once you've located them, you'll need to mark the points so that they are easy to identify when installing. It's essential to use high-quality materials and tools. Basic hand tools will assist you in making precise connections. A multimeter will check electrical values and guarantee security. Insulation tape and cable ties will help keep all connections tidy and neat. Additionally, a user's manual will give specific guidelines specific to your Ghost model.
Before you begin installing it is essential to test the system by entering the PIN code, then starting the vehicle. This will ensure that the immobiliser is working as intended, preventing unauthorised vehicle starts. This step should be done frequently as part of your regular inspections of your vehicle to ensure that the system is always functioning properly.
After the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will safeguard your pride and joy from thieves who might steal your car. It will ensure that no one is able to escape with your car if they do not have the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker that identifies any attempts to steal or tamper with. This will allow you to track your vehicle if it is stolen.
The Ghost can be utilized on a variety of vehicles and is compatible with the majority of major brands. Monty's Locksmith can help you secure your vehicle with this cutting edge device. Contact us today to find out more about our service and installation options. We are a TASSA registered installer, which assures us that we follow strict guidelines for the installation of our products. This assures customers, insurance companies and law enforcement officials that all installations are performed safely and correctly.